a trader who breaks through the use of rack when the sink is clogged

Have you ever used a rack when the sink is clogged? I heard that not only when the sink is clogged, but also to get rid of the smell in the sewer, they use rack and baking soda.If it’s a minor problem temporarily, you can solve it with a solution like a rubber cup.However, depending on the condition of the inside of the pipe, it may not be possible to solve the problem with the rack when it is stuck in the sink.When the sink is clogged, you should know exactly how to use the rack before using it.In fact, a good way is to carefully check the condition of the sink and take appropriate measures.

Today, due to the traffic jam, we are visiting the site where the customer visited the company that opened the sink.When the sink was clogged up, I tried various methods to use racks and water mixed with vinegar and baking powder.”The piping was not torn, so I couldn’t solve it, and when the sink was clogged, I left the request to the company that was torn.”We have to arrive and look at it from the sink.The sink was littered with backflow debris and still clogged.

And the kitchen smelled of damp underwater ditches, and I had to check the bottom of the sink.When I removed the mop from the sink and looked under the lower cupboard, the floor was overflowing with backflow water.The cement was soaking wet that if I left it for a while, the floor might not be usable at all.The moldy or damaged floor floor could rot with wood material, so immediate action was needed.

However, there were other points that were noticeable.The wrinkle pipe under the sink was not properly constructed.As shown in the picture, it was installed with a bent reverse gradient structure.If it is folded and installed like this, the water cannot flow naturally, and the broken part is easily clogged with debris.It is believed that the construction of such a structure was wrong from the initial stage.It was strange that the construction was carried out in this way, so it was a point that needed immediate repair.First of all, we decided to open the clogged spot, which is the main problem today, and then replace all the jabala hoses in the sink.

The suction operation had to be preceded because the clogged sink was inaccessible at all.At the entrance of the sink drain, you need to connect the suction machine and inhale it.The suction machine is equipped to inhale like a vacuum cleaner, and you can inhale even foreign substances and sewage in the pipe and create space with clogged pipes.It opens the channel and removes the accumulated residue, making it easier to do the work that follows, so let’s move on.The suction operation was carried out diligently, but there was no clogging, and most of it was discharged only from sewage.

It was expected to be full of hard foreign substances, so I had to put in a plumbing endoscope camera to find out where the problem was.

The inside situation that I checked with a sewer mouth microscope was that the drain was clogged with oil stains and oil sludge so that there was no gap between the waterways.There were so many foreign substances in the narrow drain, so I don’t think the leak was smooth.

The water used in the sink must have drained very slowly, and even with a little water, there must have been symptoms of reflux, but it seemed to have been left unattended for a long time.If you are in this situation, I think you have caused a lot of inconvenience.

We have prepared cleaning work suitable for these sewer conditions. Sewerage filled with debris must be drilled using a drain cleaner.At this time, you can use a device called a flex shaft to clean it, so you can work efficiently.In addition, in order to open it cleanly, the endoscope equipment is also put into the sewer pipe and the work is carried out by cleaning according to the clogged point and piping structure, so the problem of the sewerage is solved faster and more accurately.No matter how much water is blocked, the flex shaft rotates quickly to crush foreign substances, so it can be cleaned cleanly.After crushing, remove all remaining foreign substances from the suction machine and clean it.The higher the pollution level of the sewer, the longer the scaling time may take.I repeated the work until the piping was cleaned, and when I checked with the camera, I confirmed that all the facilities were restored.Also, the jabara hose installed in the reverse gradient structure was replaced with a normal shape.After that, fill the sink of the sink with water and conduct a drainage inspection to check the condition of the sewer.It was a large amount of water, but when I tested it, I was able to finish the work without any difficulty after confirming that the water was well drained.The customers who saw the piping that could not be solved by all means turned around cleanly and drained the water cleanly were also very satisfied.If you can’t solve the problem with the rack when the sink is clogged like this, it is recommended to check the inside of the sewer to find the cause.If you leave the sink problem unattended, not only the bad smell but also clogging and reflux phenomenon can cause inconvenience to the whole family.We are a professional sink digger that solves the problem of the clogged sink quickly and accurately, so please do not hold back and contact us from now on.Previous image Next imagePrevious image Next imagePrevious image Next image